EY3 Admin

This video shows how we manufacture our components,in house using our own MQL (Minimal Quantity Lubrication) equipment and Coolube 2210.See how the experts do it and call us today so our engineering department can start you off with the new way of machining Near Dry.

In short, the benefits of Unist Coolube® with MQL are:

  1. Significantly increases blade and tool life.
  2. A cost effective conversion for all machine types.
  3. No waste – kind to the environment and no wasting money either More economical in the long run – using Coolube® preserves machine parts for longer and prevents rusting
  4. Clean – no more messy slip hazards from excess coolant oozing down machines and walk ways
  5. The MQL system dispenses precisely the amount of Coolube® needed. No more, and no less.
  6. Better for machine operators – no more dermatitis caused by skin contact with coolants.
  7. Coolube does not oxidise or go sticky.

Nowadays, many manufacturers are under pressure to “go green”. Unist Coolube® is one of the most advanced metalworking fluids available today. Implementing Minimum Quantity Lubrication (M.Q.L.), a no-waste dispensing system, with Unist Coolube® is an easy step to limit the environmental footprint of your manufacturing operation.

MQL is the process of applying minute amounts of high-quality metalworking fluid lubricant directly to the cutting tool or work piece interface instead of using traditional flood coolants. It minimises your environmental impact by significantly reducing fluid usage and eliminating the need for coolant treatment and disposal.

These benefits are multiplied further when using 100% biodegradable Coolube® lubricants, *that is*, metalworking fluids which are formulated from renewable plant-based oils. When considering these facts, along with the performance benefits of Coolube® and MQL, it becomes obvious that this is the most advanced and responsible answer to running metal cutting and metal forming equipment.

Using the right lubricant is very important in MQL applications. The perfect lubricant will adhere to the surface of the tool and provide a thin, low friction barrier between the cutting tool and work piece. Studies have shown that Coolube® has superior properties, which make it an ideal lubricant.

Coolube’s® polar properties create a strong consistent bond between Coolube® and metallic surfaces. This creates an even, strong, and durable layer of lubrication. Coolube® reduces friction 50% better than typical mineral oils preventing heat build-up and resulting in longer tool life and a superior cut finish.

At Unist, we’ve been manufacturing green products long before the hype. Since 1957 to be exact.

With our recent USDA BioPreferred Program certification, everyone can see just how green our lubricant products are. These are the same non-toxic, environmentally friendly, green products we’ve been touting for years.

Nothing has changed but the USDA’s certification of our bio-based content through independent laboratory testing.

Unist Coolube® 2210 and 2210EP are both USDA BioPreferred products and are tested and certified biobased products. Coolube® 2210 is certified biobased with a renewable, biobased content of 93%. Coolube® 2210EP is a certified lubricant with a biobased content of 92%.This reinforces what we’ve know about Coolube all along: it’s made from natural and renewable plant-based materials.

They’re still the same great lubricants that thousands of metalworkers have come to love and rely on for improved cut quality and tool life. They just have new USDA feathers in their caps!

Read about the top ten benefits of NDD&T.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.

Just about any one you talk too who knows anything about routing aluminium successfully will tell you need a Unist applicator and that you must use Unist Coolube 2210 to do the job competitively. There are many benefits to be gained by employing the Unist “Near Dry Routing” system. In short, the benefits of Unist … Read more

We can eliminate coolant for you too. There are many benefits to be gained by employing the Unist “Near Dry Machining” system. Read about the top ten benefits of NDM.

In short, the benefits of Unist Coolube® with MQL are:

  1. Significantly increases blade and tool life.
  2. A cost effective conversion for all machine types.
  3. No waste – kind to the environment and no wasting money either More economical in the long run – using Coolube® preserves machine parts for longer and prevents rusting
  4. Clean – no more messy slip hazards from excess coolant oozing down machines and walk ways
  5. The MQL system dispenses precisely the amount of Coolube® needed. No more, and no less.
  6. Better for machine operators – no more dermatitis caused by skin contact with coolants.
  7. Coolube does not oxidise or go sticky.

Nowadays, many manufacturers are under pressure to “go green”. Unist Coolube® is one of the most advanced metalworking fluids available today. Implementing Minimum Quantity Lubrication (M.Q.L.), a no-waste dispensing system, with Unist Coolube® is an easy step to limit the environmental footprint of your manufacturing operation.

MQL is the process of applying minute amounts of high-quality metalworking fluid lubricant directly to the cutting tool or work piece interface instead of using traditional flood coolants. It minimises your environmental impact by significantly reducing fluid usage and eliminating the need for coolant treatment and disposal.

These benefits are multiplied further when using 100% biodegradable Coolube® lubricants, *that is*, metalworking fluids which are formulated from renewable plant-based oils. When considering these facts, along with the performance benefits of Coolube® and MQL, it becomes obvious that this is the most advanced and responsible answer to running metal cutting and metal forming equipment.

Using the right lubricant is very important in MQL applications. The perfect lubricant will adhere to the surface of the tool and provide a thin, low friction barrier between the cutting tool and work piece. Studies have shown that Coolube® has superior properties, which make it an ideal lubricant.

Coolube’s® polar properties create a strong consistent bond between Coolube® and metallic surfaces. This creates an even, strong, and durable layer of lubrication. Coolube® reduces friction 50% better than typical mineral oils preventing heat build-up and resulting in longer tool life and a superior cut finish.

At Unist, we’ve been manufacturing green products long before the hype. Since 1957 to be exact.

With our recent USDA BioPreferred Program certification, everyone can see just how green our lubricant products are. These are the same non-toxic, environmentally friendly, green products we’ve been touting for years.

Nothing has changed but the USDA’s certification of our bio-based content through independent laboratory testing.

Unist Coolube® 2210 and 2210EP are both USDA BioPreferred products and are tested and certified biobased products. Coolube® 2210 is certified biobased with a renewable, biobased content of 93%. Coolube® 2210EP is a certified lubricant with a biobased content of 92%.This reinforces what we’ve know about Coolube all along: it’s made from natural and renewable plant-based materials.

They’re still the same great lubricants that thousands of metalworkers have come to love and rely on for improved cut quality and tool life. They just have new USDA feathers in their caps!

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.

Watch how we maintain the same speeds and feeds as were used when employing flood coolant. See how we eat through this material with ease whilst improving tool life! There are many benefits to be gained by employing the Unist “Near Dry Machining” spray system.

In short, the benefits of Unist Coolube® with MQL are:

  1. Significantly increases blade and tool life.
  2. A cost effective conversion for all machine types.
  3. No waste – kind to the environment and no wasting money either More economical in the long run – using Coolube® preserves machine parts for longer and prevents rusting
  4. Clean – no more messy slip hazards from excess coolant oozing down machines and walk ways
  5. The MQL system dispenses precisely the amount of Coolube® needed. No more, and no less.
  6. Better for machine operators – no more dermatitis caused by skin contact with coolants.
  7. Coolube does not oxidise or go sticky.

Nowadays, many manufacturers are under pressure to “go green”. Unist Coolube® is one of the most advanced metalworking fluids available today. Implementing Minimum Quantity Lubrication (M.Q.L.), a no-waste dispensing system, with Unist Coolube® is an easy step to limit the environmental footprint of your manufacturing operation.

MQL is the process of applying minute amounts of high-quality metalworking fluid lubricant directly to the cutting tool or work piece interface instead of using traditional flood coolants. It minimises your environmental impact by significantly reducing fluid usage and eliminating the need for coolant treatment and disposal.

These benefits are multiplied further when using 100% biodegradable Coolube® lubricants, *that is*, metalworking fluids which are formulated from renewable plant-based oils. When considering these facts, along with the performance benefits of Coolube® and MQL, it becomes obvious that this is the most advanced and responsible answer to running metal cutting and metal forming equipment.

Using the right lubricant is very important in MQL applications. The perfect lubricant will adhere to the surface of the tool and provide a thin, low friction barrier between the cutting tool and work piece. Studies have shown that Coolube® has superior properties, which make it an ideal lubricant.

Coolube’s® polar properties create a strong consistent bond between Coolube® and metallic surfaces. This creates an even, strong, and durable layer of lubrication. Coolube® reduces friction 50% better than typical mineral oils preventing heat build-up and resulting in longer tool life and a superior cut finish.

At Unist, we’ve been manufacturing green products long before the hype. Since 1957 to be exact.

With our recent USDA BioPreferred Program certification, everyone can see just how green our lubricant products are. These are the same non-toxic, environmentally friendly, green products we’ve been touting for years.

Nothing has changed but the USDA’s certification of our bio-based content through independent laboratory testing.

Unist Coolube® 2210 and 2210EP are both USDA BioPreferred products and are tested and certified biobased products. Coolube® 2210 is certified biobased with a renewable, biobased content of 93%. Coolube® 2210EP is a certified lubricant with a biobased content of 92%.This reinforces what we’ve know about Coolube all along: it’s made from natural and renewable plant-based materials.

They’re still the same great lubricants that thousands of metalworkers have come to love and rely on for improved cut quality and tool life. They just have new USDA feathers in their caps!

Read about the top ten benefits of NDM.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.

Not only have we eliminated flood coolant but we have extended the blade life significantly. Watch the video to be amazed. There are many benefits to be gained by employing the Unist “Near Dry Sawing” mist system.

In short, the benefits of Unist Coolube® with MQL are:

  1. Significantly increases blade and tool life.
  2. A cost effective conversion for all machine types.
  3. No waste – kind to the environment and no wasting money either More economical in the long run – using Coolube® preserves machine parts for longer and prevents rusting
  4. Clean – no more messy slip hazards from excess coolant oozing down machines and walk ways
  5. The MQL system dispenses precisely the amount of Coolube® needed. No more, and no less.
  6. Better for machine operators – no more dermatitis caused by skin contact with coolants.
  7. Coolube does not oxidise or go sticky.

Nowadays, many manufacturers are under pressure to “go green”. Unist Coolube® is one of the most advanced metalworking fluids available today. Implementing Minimum Quantity Lubrication (M.Q.L.), a no-waste dispensing system, with Unist Coolube® is an easy step to limit the environmental footprint of your manufacturing operation.

MQL is the process of applying minute amounts of high-quality metalworking fluid lubricant directly to the cutting tool or work piece interface instead of using traditional flood coolants. It minimises your environmental impact by significantly reducing fluid usage and eliminating the need for coolant treatment and disposal.

These benefits are multiplied further when using 100% biodegradable Coolube® lubricants, *that is*, metalworking fluids which are formulated from renewable plant-based oils. When considering these facts, along with the performance benefits of Coolube® and MQL, it becomes obvious that this is the most advanced and responsible answer to running metal cutting and metal forming equipment.

Using the right lubricant is very important in MQL applications. The perfect lubricant will adhere to the surface of the tool and provide a thin, low friction barrier between the cutting tool and work piece. Studies have shown that Coolube® has superior properties, which make it an ideal lubricant.

Coolube’s® polar properties create a strong consistent bond between Coolube® and metallic surfaces. This creates an even, strong, and durable layer of lubrication. Coolube® reduces friction 50% better than typical mineral oils preventing heat build-up and resulting in longer tool life and a superior cut finish.

At Unist, we’ve been manufacturing green products long before the hype. Since 1957 to be exact.

With our recent USDA BioPreferred Program certification, everyone can see just how green our lubricant products are. These are the same non-toxic, environmentally friendly, green products we’ve been touting for years.

Nothing has changed but the USDA’s certification of our bio-based content through independent laboratory testing.

Unist Coolube® 2210 and 2210EP are both USDA BioPreferred products and are tested and certified biobased products. Coolube® 2210 is certified biobased with a renewable, biobased content of 93%. Coolube® 2210EP is a certified lubricant with a biobased content of 92%.This reinforces what we’ve know about Coolube all along: it’s made from natural and renewable plant-based materials.

They’re still the same great lubricants that thousands of metalworkers have come to love and rely on for improved cut quality and tool life. They just have new USDA feathers in their caps!

Read about the top ten benefits of NDS.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.

Near dry milling produces dry chips and is the way forward being discovered by many customers. No Mess, eliminates ALL OH&S issues for ever. There are many benefits to be gained by employing the Unist “Near Dry Machining” mist system.

In short, the benefits of Unist Coolube® with MQL are:

  1. Significantly increases blade and tool life.
  2. A cost effective conversion for all machine types.
  3. No waste – kind to the environment and no wasting money either More economical in the long run – using Coolube® preserves machine parts for longer and prevents rusting
  4. Clean – no more messy slip hazards from excess coolant oozing down machines and walk ways
  5. The MQL system dispenses precisely the amount of Coolube® needed. No more, and no less.
  6. Better for machine operators – no more dermatitis caused by skin contact with coolants.
  7. Coolube does not oxidise or go sticky.

Nowadays, many manufacturers are under pressure to “go green”. Unist Coolube® is one of the most advanced metalworking fluids available today. Implementing Minimum Quantity Lubrication (M.Q.L.), a no-waste dispensing system, with Unist Coolube® is an easy step to limit the environmental footprint of your manufacturing operation.

MQL is the process of applying minute amounts of high-quality metalworking fluid lubricant directly to the cutting tool or work piece interface instead of using traditional flood coolants. It minimises your environmental impact by significantly reducing fluid usage and eliminating the need for coolant treatment and disposal.

These benefits are multiplied further when using 100% biodegradable Coolube® lubricants, *that is*, metalworking fluids which are formulated from renewable plant-based oils. When considering these facts, along with the performance benefits of Coolube® and MQL, it becomes obvious that this is the most advanced and responsible answer to running metal cutting and metal forming equipment.

Using the right lubricant is very important in MQL applications. The perfect lubricant will adhere to the surface of the tool and provide a thin, low friction barrier between the cutting tool and work piece. Studies have shown that Coolube® has superior properties, which make it an ideal lubricant.

Coolube’s® polar properties create a strong consistent bond between Coolube® and metallic surfaces. This creates an even, strong, and durable layer of lubrication. Coolube® reduces friction 50% better than typical mineral oils preventing heat build-up and resulting in longer tool life and a superior cut finish.

At Unist, we’ve been manufacturing green products long before the hype. Since 1957 to be exact.

With our recent USDA BioPreferred Program certification, everyone can see just how green our lubricant products are. These are the same non-toxic, environmentally friendly, green products we’ve been touting for years.

Nothing has changed but the USDA’s certification of our bio-based content through independent laboratory testing.

Unist Coolube® 2210 and 2210EP are both USDA BioPreferred products and are tested and certified biobased products. Coolube® 2210 is certified biobased with a renewable, biobased content of 93%. Coolube® 2210EP is a certified lubricant with a biobased content of 92%.This reinforces what we’ve know about Coolube all along: it’s made from natural and renewable plant-based materials.

They’re still the same great lubricants that thousands of metalworkers have come to love and rely on for improved cut quality and tool life. They just have new USDA feathers in their caps!

Read about the top ten benefits of NDM.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.

The future is here at Profile Cutting Systems, a Melbourne based company who is manufacturing plate processing machinery who has chosen to adopt the Unist “Near Dry Drilling” process over traditional flood coolant which had been used in the past.

In short, the benefits of Unist Coolube® with MQL are:

  1. Significantly increases blade and tool life.
  2. A cost effective conversion for all machine types.
  3. No waste – kind to the environment and no wasting money either More economical in the long run – using Coolube® preserves machine parts for longer and prevents rusting
  4. Clean – no more messy slip hazards from excess coolant oozing down machines and walk ways
  5. The MQL system dispenses precisely the amount of Coolube® needed. No more, and no less.
  6. Better for machine operators – no more dermatitis caused by skin contact with coolants.
  7. Coolube does not oxidise or go sticky.

Nowadays, many manufacturers are under pressure to “go green”. Unist Coolube® is one of the most advanced metalworking fluids available today. Implementing Minimum Quantity Lubrication (M.Q.L.), a no-waste dispensing system, with Unist Coolube® is an easy step to limit the environmental footprint of your manufacturing operation.

MQL is the process of applying minute amounts of high-quality metalworking fluid lubricant directly to the cutting tool or work piece interface instead of using traditional flood coolants. It minimises your environmental impact by significantly reducing fluid usage and eliminating the need for coolant treatment and disposal.

These benefits are multiplied further when using 100% biodegradable Coolube® lubricants, *that is*, metalworking fluids which are formulated from renewable plant-based oils. When considering these facts, along with the performance benefits of Coolube® and MQL, it becomes obvious that this is the most advanced and responsible answer to running metal cutting and metal forming equipment.

Using the right lubricant is very important in MQL applications. The perfect lubricant will adhere to the surface of the tool and provide a thin, low friction barrier between the cutting tool and work piece. Studies have shown that Coolube® has superior properties, which make it an ideal lubricant.

Coolube’s® polar properties create a strong consistent bond between Coolube® and metallic surfaces. This creates an even, strong, and durable layer of lubrication. Coolube® reduces friction 50% better than typical mineral oils preventing heat build-up and resulting in longer tool life and a superior cut finish.

At Unist, we’ve been manufacturing green products long before the hype. Since 1957 to be exact.

With our recent USDA BioPreferred Program certification, everyone can see just how green our lubricant products are. These are the same non-toxic, environmentally friendly, green products we’ve been touting for years.

Nothing has changed but the USDA’s certification of our bio-based content through independent laboratory testing.

Unist Coolube® 2210 and 2210EP are both USDA BioPreferred products and are tested and certified biobased products. Coolube® 2210 is certified biobased with a renewable, biobased content of 93%. Coolube® 2210EP is a certified lubricant with a biobased content of 92%.This reinforces what we’ve know about Coolube all along: it’s made from natural and renewable plant-based materials.

They’re still the same great lubricants that thousands of metalworkers have come to love and rely on for improved cut quality and tool life. They just have new USDA feathers in their caps!

There are many benefits to be gained by employing the Unist “Near Dry Drilling” mist system. Read about the top ten benefits of NDE.

Unist Coolube can be used in a manual situation as well as the more common auto situation. With this set up we drilled some 20 holes before the slugger became blunt. All the time the slugger drill remained cool because of the Coolube reducing the friction therefore reducing the heat. There are many benefits to be gained by employing the Unist “Near Dry Slugger drilling” mist system.

In short, the benefits of Unist Coolube® with MQL are:

  1. Significantly increases blade and tool life.
  2. A cost effective conversion for all machine types.
  3. No waste – kind to the environment and no wasting money either More economical in the long run – using Coolube® preserves machine parts for longer and prevents rusting
  4. Clean – no more messy slip hazards from excess coolant oozing down machines and walk ways
  5. The MQL system dispenses precisely the amount of Coolube® needed. No more, and no less.
  6. Better for machine operators – no more dermatitis caused by skin contact with coolants.
  7. Coolube does not oxidise or go sticky.

Nowadays, many manufacturers are under pressure to “go green”. Unist Coolube® is one of the most advanced metalworking fluids available today. Implementing Minimum Quantity Lubrication (M.Q.L.), a no-waste dispensing system, with Unist Coolube® is an easy step to limit the environmental footprint of your manufacturing operation.

MQL is the process of applying minute amounts of high-quality metalworking fluid lubricant directly to the cutting tool or work piece interface instead of using traditional flood coolants. It minimises your environmental impact by significantly reducing fluid usage and eliminating the need for coolant treatment and disposal.

These benefits are multiplied further when using 100% biodegradable Coolube® lubricants, *that is*, metalworking fluids which are formulated from renewable plant-based oils. When considering these facts, along with the performance benefits of Coolube® and MQL, it becomes obvious that this is the most advanced and responsible answer to running metal cutting and metal forming equipment.

Using the right lubricant is very important in MQL applications. The perfect lubricant will adhere to the surface of the tool and provide a thin, low friction barrier between the cutting tool and work piece. Studies have shown that Coolube® has superior properties, which make it an ideal lubricant.

Coolube’s® polar properties create a strong consistent bond between Coolube® and metallic surfaces. This creates an even, strong, and durable layer of lubrication. Coolube® reduces friction 50% better than typical mineral oils preventing heat build-up and resulting in longer tool life and a superior cut finish.

At Unist, we’ve been manufacturing green products long before the hype. Since 1957 to be exact.

With our recent USDA BioPreferred Program certification, everyone can see just how green our lubricant products are. These are the same non-toxic, environmentally friendly, green products we’ve been touting for years.

Nothing has changed but the USDA’s certification of our bio-based content through independent laboratory testing.

Unist Coolube® 2210 and 2210EP are both USDA BioPreferred products and are tested and certified biobased products. Coolube® 2210 is certified biobased with a renewable, biobased content of 93%. Coolube® 2210EP is a certified lubricant with a biobased content of 92%.This reinforces what we’ve know about Coolube all along: it’s made from natural and renewable plant-based materials.

They’re still the same great lubricants that thousands of metalworkers have come to love and rely on for improved cut quality and tool life. They just have new USDA feathers in their caps!

Read about the top ten ways to extend your tool life.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.

10ml of oil per cutting hour is all the oil that this Peddinghaus beam processing machine uses. The machine incorporates a Unist MQL (Minimum Quantity Lubrication) system that precisely and with dead accurate repeatability, controls the Coolube 2210EP vegetable oil through the machine spindle…….through the tool and exits at the drill tip.

In short, the benefits of Unist Coolube® with MQL are:

  1. Significantly increases blade and tool life.
  2. A cost effective conversion for all machine types.
  3. No waste – kind to the environment and no wasting money either More economical in the long run – using Coolube® preserves machine parts for longer and prevents rusting
  4. Clean – no more messy slip hazards from excess coolant oozing down machines and walk ways
  5. The MQL system dispenses precisely the amount of Coolube® needed. No more, and no less.
  6. Better for machine operators – no more dermatitis caused by skin contact with coolants.
  7. Coolube does not oxidise or go sticky.

Nowadays, many manufacturers are under pressure to “go green”. Unist Coolube® is one of the most advanced metalworking fluids available today. Implementing Minimum Quantity Lubrication (M.Q.L.), a no-waste dispensing system, with Unist Coolube® is an easy step to limit the environmental footprint of your manufacturing operation.

MQL is the process of applying minute amounts of high-quality metalworking fluid lubricant directly to the cutting tool or work piece interface instead of using traditional flood coolants. It minimises your environmental impact by significantly reducing fluid usage and eliminating the need for coolant treatment and disposal.

These benefits are multiplied further when using 100% biodegradable Coolube® lubricants, *that is*, metalworking fluids which are formulated from renewable plant-based oils. When considering these facts, along with the performance benefits of Coolube® and MQL, it becomes obvious that this is the most advanced and responsible answer to running metal cutting and metal forming equipment.

Using the right lubricant is very important in MQL applications. The perfect lubricant will adhere to the surface of the tool and provide a thin, low friction barrier between the cutting tool and work piece. Studies have shown that Coolube® has superior properties, which make it an ideal lubricant.

Coolube’s® polar properties create a strong consistent bond between Coolube® and metallic surfaces. This creates an even, strong, and durable layer of lubrication. Coolube® reduces friction 50% better than typical mineral oils preventing heat build-up and resulting in longer tool life and a superior cut finish.

At Unist, we’ve been manufacturing green products long before the hype. Since 1957 to be exact.

With our recent USDA BioPreferred Program certification, everyone can see just how green our lubricant products are. These are the same non-toxic, environmentally friendly, green products we’ve been touting for years.

Nothing has changed but the USDA’s certification of our bio-based content through independent laboratory testing.

Unist Coolube® 2210 and 2210EP are both USDA BioPreferred products and are tested and certified biobased products. Coolube® 2210 is certified biobased with a renewable, biobased content of 93%. Coolube® 2210EP is a certified lubricant with a biobased content of 92%.This reinforces what we’ve know about Coolube all along: it’s made from natural and renewable plant-based materials.

They’re still the same great lubricants that thousands of metalworkers have come to love and rely on for improved cut quality and tool life. They just have new USDA feathers in their caps!

There are many benefits to be gained by employing the Unist “Near Dry Drilling” system. Read about the top ten benefits of NDD.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.

Join your competitors and enjoy all the benefits of “Near Dry”. This cost effective method of cutting metal is fast becoming the sought after,way forward in modern factory’s across Australia. There are many benefits to be gained by employing the Unist “Near Dry Drilling” system. Read about the top ten benefits of NDD.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.