Cupping Press Coil Lubrication System™

Product Info

cpcLubeSystem

Lubrication precision for can makers!

Designed specifically for the can making industry, the Unist Cupping Press Coil Lubrication System gives can makers precise control over the application of their cupping lubricants. The patented internally-fed roller design, combined with the programmable SmartFlow® controller, has proven itself capable of applying fluids in quantities as low as 20 mg/ft²(215 mg/m²). This level of control, combined with high reliability, provides years of exceptional performance with minimal maintenance.

Proven success!

Unist systems have proven themselves in the field and are currently running on over 300 cupping lines around the world.

  • Reliable fluid application
  • Compatible with a wide variety of fluids
  • Rollers last much longer than felt pads
  • Complete control of application across top and bottom of coil
  • Low maintenance - reduced down time
cpcSprollerWAlarm

Full-featured monitoring

The SmartFlow® provides full-featured monitoring of critical parameters such as fluid level, pressure and flow (optional sensors are required) and alerts users with an audible alarm and red LED. An external alarm relay can also be wired directly to a press control.

Typical Unist Cupping Press Coil Lubrication System™ installations:

cpcAction1
cpcAction2

Features, Specs & Options

Features

  • Reliable fluid application
  • Compatible with a wide variety of fluids
  • Rollers last much longer than felt pads
  • Complete control of application across top and bottom of coil
  • Low maintenance - reduced down time

Technical Specifications


    Stock type:
    • Aluminum coil stock

    Stock thickness:
    • .002" - 0.10" (.05mm - .25mm)

    Stock width:
    • 35" - 72" (89cm - 183cm)

    Fluid type(s):
    • For use with vanishing fluid or low viscosity oil (oils from 30 SUS to 150 SUS). Not designed for use with water soluble lubricants.

    Applicator material:
    • Polyester felt

    Fluid supply/capacity:
    • 10 US gal (37L) ASME rated stainless fluid tank

    Air supply:
    • Clean, dry, compressed air:
    • 80-90 psi (5.5 - 6.2 bar). 25 SCFM (708 SLPM) minimum

    Interface:
    • 4-line x 20 character LCD with 21-button tactile membrane switch

    Fluid outputs:
    • Max 22

    Control inputs:
    • 2 (dry contact/switch closure, prox sensor 10-30 VDC NPN, N.O.)

    Alarm inputs:
    • 2 (dry contact/switch closure, prox sensor 10-30 VDC NPN, N.O.)

    Outputs:
    • 22 max at power supply voltage. Max power 10 watts/output

    Alarm relay:
    • Isolated, non-fused single pole, double throw; 2 amp load max

    Max input rate:
    • 50 cycles/sec at 50% duty cycle. Minimum contact open or closed time: 10 milliseconds

    Programmable ranges:
    • Count (CNT): 0-255 counts Delay (DEL): 0-100 secs (.010 second increments) Duration (DUR): 0-100 seconds (.010 second increments)

    Fuses:
    • Supply: 2 amp
    • Output: 5 amp

    Operating temperature range:
    • 0° to +50°C (+32° to +122°F)

    Options & Accessories

    idqc

    In-die quick connect

    Allows for permanent spray nozzle mounting to the die. Ensures nozzles remain in correct position with each die change.

    fsup

    Fluid Supply Systems

    Your fluid application system needs a steady supply of pressurized fluid. Unist offers a broad range of options to meet your needs.

    Related Videos

    MF Minute #5

    Learn how to create setups (jobs) in this installment of the Metal Forming Minute