menu x
menu x

Why Unist Coolube 2210 & 2210EP ?

Coolube 2210 & 2210EP are high performance vegetable-derived oils developed specifically for MQL metal cutting operations.

The use of minute applications of Coolube  vegetable oil-based lubricants in machining operations reduces heat generation and improves speed production, surface finish, tool life and reduce housekeeping while eliminating the collecting, treating and disposal considerations associated with flood coolants. The high strength microscopic lubricating film on the tool reduces friction, thus reducing heat generation and subsequently the need to remove heat. Coolube oils are safe, non-toxic and biodegradable.

Unist manufactures a high quality, positive displacement modular MQL application system which dispenses Coolube precisely, consistently and totally controllable, this equipment is critical for obtaining optimum results. Applying too much lubricant is detrimental, and may result in unnecessary clean up and smoking, and will impede the friction reduction phenomenon.

This concept applies to virtually all metalworking processes, many plastics and composites.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.

FREE Bottle of Coolube®

When you buy a Coolubricator, saw system or any other piece of Unist Hardware over and above $1,900.00 we will give you a 3.785 liter bottle of Coolube 2210/2210AL/2210EP absolutely free of charge (valued at $245.00)

Also any customer that buys more than 7 bottles of Coolube 2210/AL/EP will get the 8th one absolutely free of charge, plus free delivery anywhere in Australia.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.

Limited Time Offer!

This offer is only available until June 30 2019. Get in quick to take advantage of our special EOFY deal and save!

Just get in touch by calling Unist on 02 8850 2022.

and cannot be used with customers who already receive special pricing.

Changing from Alucobond/Composite panel to Solid Aluminium Sheet

Do you find yourself having to Route 3mm solid Aluminium sheet in preference to Alucobond/Composite panel? If you are experiencing any of the following you need to talk to our John Barker (Managing Director) of Unist Australia.

  • Ragged cutting
  • Burning out cutters
  • Breaking router bits
  • Terrible surface finish
  • Just the inability to get the job done

We understand your problem, you need to lubricate the routing cutter with our 3 nozzle Coolubricator.

For help on this matter call John Barker on 02 8850 2022 or email [email protected].

Watch a Routing video:

The facade industry is moving in part from ACM to Solid Aluminium panels. HVG/Alucobond Architectural are introducing MondoClad, a Pre-finished 3 mm aluminium panel.For more information go to: