menu x
menu x

How to saw solid carbon steels up to 400mm diameter

Here we show how we can simply modify an existing band saw that had been traditionally using flood coolant and transform it into a MQL (Minimal Quantity Lubrication) application. This modification is inexpensive to implement and can be fitted up quite easily, the transformation is remarkable, watch the short video to see how we do it.

There are many benefits to be gained by employing the Unist “Near Dry Sawing” system. Read about the top ten benefits of NDS.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.

Changing from Alucobond/Composite panel to Solid Aluminium Sheet

Do you find yourself having to Route 3mm solid Aluminium sheet in preference to Alucobond/Composite panel? If you are experiencing any of the following you need to talk to our John Barker (Managing Director) of Unist Australia.

  • Ragged cutting
  • Burning out cutters
  • Breaking router bits
  • Terrible surface finish
  • Just the inability to get the job done

We understand your problem, you need to lubricate the routing cutter with our 3 nozzle Coolubricator.

For help on this matter call John Barker on 02 8850 2022 or email [email protected].

Watch a Routing video: https://unist.com.au/routing

The facade industry is moving in part from ACM to Solid Aluminium panels. HVG/Alucobond Architectural are introducing MondoClad, a Pre-finished 3 mm aluminium panel.For more information go to:

https://hvgfacades.com.au/