menu x
menu x

How to free your CNC from flood coolant

The Revolution uses our patent-pending MQL technology to integrate seamlessly with CNC machines. The system can be configured with one or two oil/air outputs which can be used for either external spray nozzles or through-the-spindle lubrication. The output volume of the Revolution can be tailored to each tool in a machine directly from the CNC program, allowing for optimization of each machining process. Additionally, the Revolution includes an optional pulsed Air Blow-off Nozzle for removing chips in difficult operation like pocket milling. This system was developed specifically for OEM installation on CNC machines, but it can also easily be retrofitted on most existing machines with available M-code outputs.

There are many benefits to be gained by employing the Unist system, click this link to read the top 10 benefits.

At the same time why not check out the benefits of using Coolube over other cheaper products that are on the market.

FREE Bottle of Coolube®

When you buy a Coolubricator, saw system or any other piece of Unist Hardware over and above $1,900.00 we will give you a 3.785 liter bottle of Coolube 2210/2210AL/2210EP absolutely free of charge (valued at $245.00)

Also any customer that buys more than 7 bottles of Coolube 2210/AL/EP will get the 8th one absolutely free of charge, plus free delivery anywhere in Australia.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.


Limited Time Offer!

This offer is only available until June 30 2019. Get in quick to take advantage of our special EOFY deal and save!

Just get in touch by calling Unist on 02 8850 2022.

THIS OFFER ENDS ON THE 30TH OF JUNE 2019
and cannot be used with customers who already receive special pricing.

Changing from Alucobond/Composite panel to Solid Aluminium Sheet

Do you find yourself having to Route 3mm solid Aluminium sheet in preference to Alucobond/Composite panel? If you are experiencing any of the following you need to talk to our John Barker (Managing Director) of Unist Australia.

  • Ragged cutting
  • Burning out cutters
  • Breaking router bits
  • Terrible surface finish
  • Just the inability to get the job done

We understand your problem, you need to lubricate the routing cutter with our 3 nozzle Coolubricator.

For help on this matter call John Barker on 02 8850 2022 or email [email protected].

Watch a Routing video: https://unist.com.au/routing

The facade industry is moving in part from ACM to Solid Aluminium panels. HVG/Alucobond Architectural are introducing MondoClad, a Pre-finished 3 mm aluminium panel.For more information go to:

https://hvgfacades.com.au/