Unist makes sawing fast and efficient as seen on Hydmech’s new CSNC 80!
Development of very thin carbide tip and cermet tipped saw blades have attracted industries to use them for mass metal sawing applications as material cutting wastage or kerf loss is very similar to that of band saw machines.
With the technological development of the blade, micro mist spray oil and high accuracy gear boxes, the life of the blade has been extended lowering overall cost per cut.
Many industries have started using carbide sawing machines with much success because of AC servo operation, the maintenance shutdown is less and machines are very reliable for 24 hours working.
Changing from Alucobond/Composite panel to Solid Aluminium Sheet
Do you find yourself having to Route 3mm solid Aluminium sheet in preference to Alucobond/Composite panel? If you are experiencing any of the following you need to talk to our John Barker (Managing Director) of Unist Australia.
- Ragged cutting
- Burning out cutters
- Breaking router bits
- Terrible surface finish
- Just the inability to get the job done
We understand your problem, you need to lubricate the routing cutter with our 3 nozzle Coolubricator.
For help on this matter call John Barker on 02 8850 2022 or email [email protected].
Watch a Routing video: https://unist.com.au/routing
The facade industry is moving in part from ACM to Solid Aluminium panels. HVG/Alucobond Architectural are introducing MondoClad, a Pre-finished 3 mm aluminium panel.For more information go to: