menu x
menu x

Quantum™

Quantum™ Advanced Integrated Lubrication

Take The Leap

The Quantum™ system is a leap forward in Minimum Quantity Lubrication (MQL) technology. This state-of-the-art system interfaces directly with machines and their controllers giving you unprecedented control over your MQL application.

Download Brochure

Quantum control

The Quantum™ is designed for complex operations and gives you reliable, digital control of the MQL. When used with a Unist Spindle Kit, you get the full benefits of dual-channel, through-spindle MQL.

Since the Quantum™ supports up to 6 independent outputs, it’s the perfect choice when adding external spray nozzles or an air blow-off to your through-spindle application.

The Quantum™ can be controlled through discrete signals, but the real benefit comes when controlling it through the RS-232 interface. This provides a nearly unlimited number of MQL rates. You can specify the exact amount of lubricant and air required when you need it in your CNC program. The Quantum™ allows you to specify the fluid output down to a fraction of a drop to fine-tune machining processes, accurately measure and control usage, and share settings between multiple machines.

Quantify your lubrication with digitally controlled output.
Control the Quantum™ directly from your CNC program.
Dual use nozzle performs as both lubricant output and air blow-off to clear chips.
Setup, store, and select multiple jobs with the Quantum’s™ simple user interface.
Active monitoring with alerts informs operators when critical issues arise.
Use both dual-channel through-spindle and external nozzles in complex cutting operations
Optimum through-spindle MQL delivery when used with a Unist Spindle Kit

FREE Bottle of Coolube®

When you buy a Coolubricator, saw system or any other piece of Unist Hardware over and above $1,900.00 we will give you a 3.785 liter bottle of Coolube 2210/2210AL/2210EP absolutely free of charge (valued at $245.00)

Also any customer that buys more than 7 bottles of Coolube 2210/AL/EP will get the 8th one absolutely free of charge, plus free delivery anywhere in Australia.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.


Limited Time Offer!

This offer is only available until June 30 2019. Get in quick to take advantage of our special EOFY deal and save!

Just get in touch by calling Unist on 02 8850 2022.

THIS OFFER ENDS ON THE 30TH OF JUNE 2019
and cannot be used with customers who already receive special pricing.

Changing from Alucobond/Composite panel to Solid Aluminium Sheet

Do you find yourself having to Route 3mm solid Aluminium sheet in preference to Alucobond/Composite panel? If you are experiencing any of the following you need to talk to our John Barker (Managing Director) of Unist Australia.

  • Ragged cutting
  • Burning out cutters
  • Breaking router bits
  • Terrible surface finish
  • Just the inability to get the job done

We understand your problem, you need to lubricate the routing cutter with our 3 nozzle Coolubricator.

For help on this matter call John Barker on 02 8850 2022 or email [email protected].

Watch a Routing video: https://unist.com.au/routing

The facade industry is moving in part from ACM to Solid Aluminium panels. HVG/Alucobond Architectural are introducing MondoClad, a Pre-finished 3 mm aluminium panel.For more information go to:

https://hvgfacades.com.au/