Coolubricator™: The perfect MQL metal cutting companion
With its precision positive displacement pump and individually adjustable air and fluid volumes, the Coolubricator™ is the perfect Minimum Quantity Lubrication solution for metal cutting.This patented device, which is ideal for dispensing tapping fluids, limits the amount of fluid used, reducing waste and mess in your workshop. The following benefits create a win-win-win result for you in terms of better tool performance; a non-toxic environmental impact; and ongoing money savings gained from proper tool care:
- Reduces fluid usage
- Promotes a clean and safe work environment
- Prolongs tool life
- Improves cut quality
- For best results use Unist’s environmentally friendly Coolube®
- Dry chips – higher recycling value
Dial in the “Sweet Spot”
With MQL, individual metal cutting applications each have their own “sweet spot” or precise amount of fluid necessary for optimum efficiency. Too little fluid, or too much fluid and tool life can suffer and fluid can be wasted. The Coolubricator™ gives you precise control over fluid output with separate fluid and air output adjustment. This means finding the sweet spot for your application is a breeze and once it’s set, you can count on the Coolubricator™ to deliver the perfect amount of fluid again and again.
Separate Air & Fluid
is the key to delivering consistent atomization and fluid distribution over extended lengths of supply tubing. This is where the patented Unist Co-Axial Nozzle steps in. Fluid and air are kept separate until they are combined at the nozzle tip. This creates an evenly atomized spray and eliminates messy drips. Be sure to order your Coolubricator™ with Co-Axial hose and nozzle to maximise your lubricant delivery!
The Coolubricator™ has a variety of applications. It can be used for metal sawing or drilling, as well as tapping and milling. It can also help with routing and turning and broaching metal for precision and efficiency. It is the ideal solution for use in machining and the manufacturing of metal components. For more information, check out the Coolubricator Product Flyer or contact our customer service team.
Continuous Output – Pulse Generator = infinite cycling at an adjustable 5-200 pulse/min.
Additional Output – Drive up to 16 pumps for 16 individual output options
Air Valve Options – Control air input with Manual Valve, Air Pilot Valve, or 3-Way Solenoid Valve (available in 110 VAC or 24 VDC)
Pump Options – 3 types available:
- 1 Drop (1/30 mL per stroke)
- 3 Drop (1/10 mL per stroke)
- Check Valve (for use with coolant or fluid with <100 SUS viscosity)
Choice of reservoir capacity – 16 oz. nylon reservoir standard
- 10 oz. nylon
- 16 oz. polyethylene
- 32 oz. polyethylene
- 64 oz. polyethylene
Rollover image for component info
- Gravity Feed
- Pulse Generator
- Solenoid Valve
- Air Filter
- Removable, Lockable
LIFETIME PUMP WARRANTY
when used exclusively
Click on a photo to see a larger version.
FREE Bottle of Coolube®
When you buy a Coolubricator, saw system or any other piece of Unist Hardware over and above $1,900.00 we will give you a 3.785 liter bottle of Coolube 2210/2210AL/2210EP absolutely free of charge (valued at $245.00)
Also any customer that buys more than 7 bottles of Coolube 2210/AL/EP will get the 8th one absolutely free of charge, plus free delivery anywhere in Australia.
Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.
Limited Time Offer!
This offer is only available until June 30 2019. Get in quick to take advantage of our special EOFY deal and save!
Just get in touch by calling Unist on 02 8850 2022.
THIS OFFER ENDS ON THE 30TH OF JUNE 2019
and cannot be used with customers who already receive special pricing.
Changing from Alucobond/Composite panel to Solid Aluminium Sheet
Do you find yourself having to Route 3mm solid Aluminium sheet in preference to Alucobond/Composite panel? If you are experiencing any of the following you need to talk to our John Barker (Managing Director) of Unist Australia.
- Ragged cutting
- Burning out cutters
- Breaking router bits
- Terrible surface finish
- Just the inability to get the job done
We understand your problem, you need to lubricate the routing cutter with our 3 nozzle Coolubricator.
For help on this matter call John Barker on 02 8850 2022 or email [email protected].
Watch a Routing video: https://unist.com.au/routing
The facade industry is moving in part from ACM to Solid Aluminium panels. HVG/Alucobond Architectural are introducing MondoClad, a Pre-finished 3 mm aluminium panel.For more information go to: