• Home
  • The MQL Handbook
menu x
menu x

The MQL Handbook

Is Minimum Quantity Lubrication right for you?

Find out with the MQL Handbook.

Minimum Quantity Lubrication (MQL) is nothing new.  In fact, it’s widely accepted in European machining where strict environmental regulation makes going green less of a choice and more of a fact of life for metalworkers. MQL has a proven track record in working just as well as, or better than, traditional flood coolants and without costly negative consequences like health hazards, disposal costs, pricey circulation equipment, and mess!

Read the MQL Handbook and find out:
  • What makes MQL different
  • How MQL works
  • What equipment you’ll need for MQL
  • How to set up for MQL machining
  • What fluids are good or bad for MQL
  • What MQL can do for you

QUICK PREVIEW: CHECK OUT THE FIRST FEW PAGES

How do you get your copy? It’s easy. Simply fill out the form at right and we’ll email you a link to download your copy – It’s as easy as that!

Didn’t receive your copy? We’ve made every effort to make sure your download link doesn’t wind up in your spam filter but occasionally it happens or, for whatever reason, the email doesn’t arrive. If you don’t see your download link within several minutes, please check your spam folder and mark as ‘not spam’ or contact us and we’ll send it to you directly.

Changing from Alucobond/Composite panel to Solid Aluminium Sheet

Do you find yourself having to Route 3mm solid Aluminium sheet in preference to Alucobond/Composite panel? If you are experiencing any of the following you need to talk to our John Barker (Managing Director) of Unist Australia.

  • Ragged cutting
  • Burning out cutters
  • Breaking router bits
  • Terrible surface finish
  • Just the inability to get the job done

We understand your problem, you need to lubricate the routing cutter with our 3 nozzle Coolubricator.

For help on this matter call John Barker on 02 8850 2022 or email [email protected].

Watch a Routing video: https://unist.com.au/routing

The facade industry is moving in part from ACM to Solid Aluminium panels. HVG/Alucobond Architectural are introducing MondoClad, a Pre-finished 3 mm aluminium panel.For more information go to:

https://hvgfacades.com.au/

 

Changing from Alucobond/Composite panel to Solid Aluminium Sheet

Do you find yourself having to Route 3mm solid Aluminium sheet in preference to Alucobond/Composite panel? If you are experiencing any of the following you need to talk to our John Barker (Managing Director) of Unist Australia.

  • Ragged cutting
  • Burning out cutters
  • Breaking router bits
  • Terrible surface finish
  • Just the inability to get the job done

We understand your problem, you need to lubricate the routing cutter with our 3 nozzle Coolubricator.

For help on this matter call John Barker on 02 8850 2022 or email [email protected].

Watch a Routing video: https://unist.com.au/routing