menu x
menu x

ThroughSpindle™ Unist Spindle Kit

ThroughSpindle™ Unist Spindle Kit

A more perfect union

Through-spindle MQL is the most consistent, clean, and seamless way to apply MQL in a CNC machine and offers many benefits. With proper tool design, lubricant is delivered precisely where needed; even when cutting holes or slots. This allows every tool in the machine to be individually optimized. Unlike with external nozzles, there is no spraying from a distance. Users have found this approach reduces the amount of lubricant needed up to 70% when compared to external nozzles!

To get the best through-spindle MQL performance, it is necessary to deliver the lubricant and air in separate channels through the spindle to the tool holder. This gives the technique its name, Dual-channel MQL. It requires two specially-designed components: a rotary union and a fluid delivery tube.

What’s included

Unlike most rotary unions designed for through-spindle coolant, the Unist dual-channel rotary union is specifically designed with separate lubricant and air paths. It has been optimized to provide superior system performance when combined with Unist’s proven MQL applicators.

The fluid delivery tube carries the lubricant from the rotary union, through the spindle and to the tool holder. This tube is custom designed and manufactured specifically for your spindle to allow sufficient lubricant and air flow, while not interfering with tool changes.


Dual-Channel Through-Spindle MQL

The Unist Spindle Kit will keep your lubricant and air in separate channels through the spindle to the tool holder. This gives you the most consistent, clean, and seamless implementation of MQL in a CNC machine.

Not sure what you need for your machine? Contact us!

FREE Bottle of Coolube®

When you buy a Coolubricator, saw system or any other piece of Unist Hardware over and above $1,900.00 we will give you a 3.785 liter bottle of Coolube 2210/2210AL/2210EP absolutely free of charge (valued at $245.00)

Also any customer that buys more than 7 bottles of Coolube 2210/AL/EP will get the 8th one absolutely free of charge, plus free delivery anywhere in Australia.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.

Limited Time Offer!

This offer is only available until June 30 2019. Get in quick to take advantage of our special EOFY deal and save!

Just get in touch by calling Unist on 02 8850 2022.

and cannot be used with customers who already receive special pricing.

Changing from Alucobond/Composite panel to Solid Aluminium Sheet

Do you find yourself having to Route 3mm solid Aluminium sheet in preference to Alucobond/Composite panel? If you are experiencing any of the following you need to talk to our John Barker (Managing Director) of Unist Australia.

  • Ragged cutting
  • Burning out cutters
  • Breaking router bits
  • Terrible surface finish
  • Just the inability to get the job done

We understand your problem, you need to lubricate the routing cutter with our 3 nozzle Coolubricator.

For help on this matter call John Barker on 02 8850 2022 or email [email protected].

Watch a Routing video:

The facade industry is moving in part from ACM to Solid Aluminium panels. HVG/Alucobond Architectural are introducing MondoClad, a Pre-finished 3 mm aluminium panel.For more information go to: