menu x
menu x

Coolube® 2210EP. Formulated to Outperform.

SDS Coolube2210EP    Coolube Product Flyer

Advanced Metal Cutting Lubricant

Coolube® 2210EP features a special formulation ideal for ferrous metals. Its 100% natural base with extreme pressure additives will not oxidize (become sticky or leave a residue). Coolube® 2210EP does not contain any ingredients currently recognized as hazardous by OSHA, IARC or NIP. Unist Coolube® 2210EP will almost always outperform all other oils by providing specific benefits when machining Ferrous metals. Testing shows it provides exceptional lubricity and stability under load, which helps improve tool life. Unist Coolube® 2210EP is nearly odorless and does not cause skin, eye irritation.

Coolube® 2210EP is a USDA certified biobased product.

  • Improves performance and increases life of cutting tools, taps, and saw blades.
  • Specially formulated for use with ferrous metals.
  • Also works with all non-ferrous metals except copper.
  • Extreme temperature environments (-20˚F to 400˚F).

Coolube® 2210EP is formulated from cosmetic grade raw materials and is entirely worker and environmentally safe. It will never cause dermatitis.

  • Odor: Sulphur
  • Appearance: Yellow
  • Water Solubility: Insoluble
  • Flash Point: >400°F (200°C)
  • Oxidation/Polymerization: None
  • Available:
    • 1 Gallon (3.78 Liters) Bottles
warrantyLogo
LIFETIME PUMP WARRANTY
when used exclusively
with Coolube®

 

Changing from Alucobond/Composite panel to Solid Aluminium Sheet

Do you find yourself having to Route 3mm solid Aluminium sheet in preference to Alucobond/Composite panel? If you are experiencing any of the following you need to talk to our John Barker (Managing Director) of Unist Australia.

  • Ragged cutting
  • Burning out cutters
  • Breaking router bits
  • Terrible surface finish
  • Just the inability to get the job done

We understand your problem, you need to lubricate the routing cutter with our 3 nozzle Coolubricator.

For help on this matter call John Barker on 02 8850 2022 or email [email protected].

Watch a Routing video: https://unist.com.au/routing

The facade industry is moving in part from ACM to Solid Aluminium panels. HVG/Alucobond Architectural are introducing MondoClad, a Pre-finished 3 mm aluminium panel.For more information go to:

https://hvgfacades.com.au/

 

Changing from Alucobond/Composite panel to Solid Aluminium Sheet

Do you find yourself having to Route 3mm solid Aluminium sheet in preference to Alucobond/Composite panel? If you are experiencing any of the following you need to talk to our John Barker (Managing Director) of Unist Australia.

  • Ragged cutting
  • Burning out cutters
  • Breaking router bits
  • Terrible surface finish
  • Just the inability to get the job done

We understand your problem, you need to lubricate the routing cutter with our 3 nozzle Coolubricator.

For help on this matter call John Barker on 02 8850 2022 or email [email protected].

Watch a Routing video: https://unist.com.au/routing