menu x
menu x



  • Control any number of nozzles simultaneously or independently.
  • Mount valves anywhere between the tank and metering block; best results are obtained when mounted as close as possible to the metering block assembly.
  • Air Pilot Valve and Solenoid Valve repair kits available.
  • Talk with a lubrication expert and learn what valve will help you reduce friction in your operation.
    Contact us.


Manual_ValveManual on/off valve controls lubricant and air flow to the nozzle tip chamber. There it is precisely mixed and atomized into a lubricant spray.
Air_PilotAir Pilot Valve automatically controls system operation with tool’s normal operation. Choice of 1/4 in. or 1/8 in. Manual foot pedal actuation available.
SolenoidSolenoid Valve automatically activates lubricant and air flow with the tool operation. Valves control both air and liquid shut-off and operate instantaneously when a signal is supplied.

FREE Bottle of Coolube®

When you buy a Coolubricator, saw system or any other piece of Unist Hardware over and above $1,900.00 we will give you a 3.785 liter bottle of Coolube 2210/2210AL/2210EP absolutely free of charge (valued at $245.00)

Also any customer that buys more than 7 bottles of Coolube 2210/AL/EP will get the 8th one absolutely free of charge, plus free delivery anywhere in Australia.

Also at the same time check out the benefits of using Coolube over other cheaper products that are on the market.

Limited Time Offer!

This offer is only available until June 30 2019. Get in quick to take advantage of our special EOFY deal and save!

Just get in touch by calling Unist on 02 8850 2022.

and cannot be used with customers who already receive special pricing.

Changing from Alucobond/Composite panel to Solid Aluminium Sheet

Do you find yourself having to Route 3mm solid Aluminium sheet in preference to Alucobond/Composite panel? If you are experiencing any of the following you need to talk to our John Barker (Managing Director) of Unist Australia.

  • Ragged cutting
  • Burning out cutters
  • Breaking router bits
  • Terrible surface finish
  • Just the inability to get the job done

We understand your problem, you need to lubricate the routing cutter with our 3 nozzle Coolubricator.

For help on this matter call John Barker on 02 8850 2022 or email [email protected].

Watch a Routing video:

The facade industry is moving in part from ACM to Solid Aluminium panels. HVG/Alucobond Architectural are introducing MondoClad, a Pre-finished 3 mm aluminium panel.For more information go to: