TSL™ System

Product Info

Lubrication for ultra-thin stock

The Unist TSL™ system provides smooth and consistent lubrication to the coil, which helps protect tooling and reduces excess waste. The system features controlled lubricant delivery to both sides of thin stock using specialized felt application pads. The TSL™ is capable of applying lubricant coatings as low as 25 mg/ft² (269 mg/m²), and is an ideal solution for applications where proper lubrication is critical. The Unist TSL™ is commonly used for fin stock and thin coils used in the container and packaging industry.

tslWsflow
  • Lubricates stock from .002" to .010" (.05mm - .25mm) thick
  • Protects expensive tooling
  • Lubricates both sides of stock
  • Reduces fluid usage
tslAngle
  • Protects expensive tooling
  • Consistent application at a fraction of the cost of an electrostatic system
  • Controlled application of low or no VOC fluids
  • Pneumatic cylinders maintain consistent contact with material
  • Reduce fluid usage – apply only what you need
  • Eliminate the mess of a dip tank lubrication system
Tough, industrial design
Tough, industrial design
Multiple mounting options
Multiple mounting options
Reversible felt application pads (both sides can be used)
Reversible felt application pads (both sides can be used)
Adjustable pneumatic cylinders
Adjustable pneumatic cylinders

Available widths

9"

(228mm)

36"

(914mm)

18"

(457mm)

45"

(1143mm)

45"

27"

(686mm)

tsl8

Lubricant is delivered through separate, modular 9" manifold blocks combined to lubricate multiple widths.

Take control with the SmartFlow®

The SmartFlow® alerts you to issues before they become expensive problems that interrupt or stop your production lines. With the SmartFlow® you'll know immediately if the fluid supply runs low, if fluid pressure varies, or if flow to the applicator is interrupted (Level, pressure, and flow sensors required). The SmartFlow® features an intuitive, easy-to-use interface as well as an access code to prevent unauthorized tampering or changes in fluid settings.

smallSflow
SmartFlow®
  • Monitors critical parameters
  • Controls up to 22 outputs
  • Stores up to 250 setups
Easy to use touch screen interface.

Easy to use touch screen interface.

The SmartFlow® controller can monitor pressure, flow, valve performance and line status.

The SmartFlow® controller can monitor pressure, flow, valve performance and line status.

jobCreate

Job setup wizard makes job creation easy.

Features, Specs & Options

Features

  • Protects expensive tooling
  • Consistent application at a fraction of the cost of an electrostatic system
  • Controlled application of low or no VOC fluids
  • Lubricates both sides of stock
  • Pneumatic cylinders maintain consistent contact with material
  • Reduce fluid usage

Technical Specifications

    Stock type:
    • Thin gauge coil stock
    Stock thickness:
    • .002" - 0.10" (.05mm - .25mm)
    Stock width:
    • 9" - 45" (228mm - 1143mm)
    Line speed:
    • 150 ft/min (45.7 m/min)
    Fluid type(s):
    • For use with vanishing fluid or low viscosity oil (oils from 30 SUS to 150 SUS). Not designed for use with water soluble lubricants
    Fluid supply:
    • Pressurized 3 gal(11.4L), 6 gal(22.7L), 15 gal(56.8L), 30 gal(113.6L) tanks. Also 20 gal(75.7L) poly tank with diaphragm pump
    Applicator material:
    • Wool felt
    Controller:
    • SPR-2000™
    Power:

    Buy Now
    Request a Quote